LED bike lights for the application with hub dynamo, particularly designed for city and travel rice rods and pedelecs.
Special features
� with high-performance LED for a bright and wide light distribution
� sensor controlled in-off automatic circuit depending on the ambient lighting
� Battery -free parking light function with capacitor, for more than 4 minutes parking light during a stop
� Up to 20 lux illuminated standing in the light beam center (at a distance of 10 m)
� for the assembly on the front fork; With integrated rays
� with a fixed entrance line and output plug -in contacts for the connection of the final light!
Technical information
Hooked
� The rear hooked is made from impact -resistant ABS
� front part made of transparent PMMA with integrated retro reflector
� Spritz � and rainwater repellent
Stainless steel holder
Halter made of stainless steel for a simple and permanent assembly on the fork corne or on the �Booster� of regulatory forks and suspension forks with an M6 screw. Marwi recommends using a stainless steel screw.
Connect
� a permanently connected twin line, 62 cm long, for the connection to the hub dynamo (entrance)
� two connection contacts on the back side for the connection of the final lamp (� -switched output)
(In the area of the StVZO area, the final lamp must be connected to these starting contacts)
Switch
Easy to be beaming one-off slide switch on the back side
Raumatia
� of the rays are integrated into the headlight
� of this �Retro� Reflictional
Ma�e 60 x 58 x 67 mm (Home x width x Larynge)
Weight 80 g
� The complete headlight is structured in construction according to the German Street Transport Registration Regulations (K990)
� The retro-reflector corresponds to the German StVZO and is approved according to ECE-R3 (IA-E1-023716)
For your own security, please praise the function of the headlight before every drive
Would you like to lease a Bike or an E-Bike? We work with all common leasing providers. A step by step guide and the application form "Leasing request" can be found below on this page.
Step by step instructions "Leasing Request":
- Put your Bike and possibly accessories in the Basket
- If you have selected all the products go to the Check Out
- Choose the shipping method
- Choose as a payment method: "Leasing request"
- Complete your order
- On the order confirmation page you will find the link to Application form "Leasing request"
- Follow the instructions and Fill the application form completely
- Send the application form "Leasing request"
- Wait for the Confirmation from us. If the leasing relationship comes into being, you will be informed immediately by us and can pick up your bike or we will send it to you.****
If the leasing is not confirmed, no costs will be incurred for you.
Thank you for choosing Hild Radwelt!
{Formbuilder: 32930}
*As soon as the leasing application has been checked, it will be checked again by the employer and the leasing company. This can take 1 to 4 weeks (confirmation depends on the employer and the order situation of the leasing company).
** For online leasing processes, we charge a service flat rate of € 149. This is collected when a leasing is created in connection with the shipping of the bike. The service flat rate includes the contract processing as well as the entire logistics with packaging & shipping, mail order insurance and delivery on the day of your choice.
(With Jobrad, the flat rate can be included in the leasing rate, for other leasing providers it is billed individually.)
*** With the delivery of a Pegasus E -Bike, you will receive a frame lock with chain for € 49.95.